Yamaha DM2000 Owner's Manual page 382

382
Appendix C: MIDI
SUB STATUS 0011nnnn 3n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00010000 10
0100ffff 4f
TITLE 0mmmmmmm mh
0mmmmmmm ml
EOX 11110111 F7
13.4.17 Parameter change
(Function call: scene/library clear)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified memory/library will be cleared.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00010000 10
0110ffff 6f
0mmmmmmm mh
0mmmmmmm ml
EOX 11110111 F7
function
SCENE LIB CLEAR
EQ LIB CLEAR
GATE LIB CLEAR
COMP LIB CLEAR
EFF LIB CLEAR
GEQ LIB CLEAR
CHANNEL LIB CLEAR
INPATCH LIB CLEAR
OUTPATCH LIB CLEAR
Bus to Stereo LIB CLEAR
Surround Monitor LIB CLEAR
AUTOMIX LIB CLEAR
* Varies with the firmware version.
13.4.18 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, pairing will be enabled/disabled for the specified
channel. (Otherwise, these messages are reserved for future use.)
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00010001 11
0000ffff 0f
0sssssss sh
0sssssss sl
DATA 0ddddddd dh
0ddddddd dl
EOX 11110111 F7
DM2000 Version 2—Owner's Manual
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call
number High
number Low
End of exclusive
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call
clear function
number High
number Low
End of exclusive
number
0x60 1-99
0x61 41-200
0x62 5-128
0x63 37-128
0x64 xx(*)-128
0x65 1-128
0x66 2-128
0x67 1-32
0x68 1-32
0x69 1-32
0x6A 1-32
0x6B 1-16
(Function call: pair)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call Pair
function
Source channel H
Source channel L
Destination channel H
Destination channel L
End of exclusive
function
PAIR ON with COPY
PAIR ON with RESET BOTH
PAIR OFF
*1) 0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 -
267:AUX12
• In the case of PAIR, you must specify channels for which pairing
is possible.
• In the case of PAIR ON with COPY, you must specify Source
Channel as the copy source, and Destination Channel as the
copy destination.
13.4.19 Parameter change (Function call: effect)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the corresponding effect's function activates (de-
pending on the effect type).
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call Effect Event
ADDRESS 00010010 12
function
0000ffff 0f
00000000 00
Release:0, Press:1
0ppppppp pp
DATA 00000000 00
Effect number (0:Effect1 - 7:Effect8)
0eeeeeee ee
End of exclusive
EOX 11110111 F7
function
Freeze Play button
Freeze Record button
Auto Pan 5.1 Trigger Button
Auto Pan 5.1 Reset Button
• This does not activate when the effect type is different.
13.4.20 Parameter Change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
The Scene memory Sort table is updated as soon as the messages are re-
ceived.
If Studio Manager performs a scene memory sort, it will transmit this data
to the DM2000.
Transmission
When scene memory sort is executed on the DM2000, the memory sort ta-
ble will be transmitted to Studio Manager.
Studio Manager will sort the memories according to this data.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM2000
MODEL ID 00000110 06
Library sort table
ADDRESS 00010011 13
Library type
0000ffff 0f
Data
DATA 0ddddddd ds
:
:
Data
0ddddddd de
End of exclusive
EOX 11110111 F7
8-7 conversion is performed on the data area in the same way as for bulk.
channel
0x00 *1)
0x01 *1)
0x02 *1)
channel
0x00 0:Effect1 - 7:Effect8
0x01 0:Effect1 - 7:Effect8
0x02 0:Effect1 - 7:Effect8
0x03 0:Effect1 - 7:Effect8
(Sort table data)