Stereo Out Inserts; Compressing The Stereo Out; Grouping Master Compressors; Muting The Stereo Out (On/Off) - Yamaha 02R96 Owner's Manual

74
Chapter 8—Stereo Out

Stereo Out Inserts

Internal effects processors and external signal processors can be patched into the Stereo Out
by using the Inserts. See "Using Inserts" on page 95 for more information.

Compressing the Stereo Out

Signal dynamics can be controlled by using the Stereo Out Compressor. See "Compressing
Channels" on page 97 for more information.

Grouping Master Compressors

The Stereo Out Compressor can be grouped with the Compressors of other Output Chan-
nels. See "Grouping Output Channel Compressors" on page 100 for more information.

Muting the Stereo Out (ON/OFF)

ON

Grouping Master Mutes (ON/OFF)

The Stereo Out Mute can be grouped with the Mutes of other Output Channels. See
"Grouping Output Channel Mutes (ON/OFF)" on page 107 for more information.

Setting the Stereo Out Level

The Stereo Out level is set by using the STEREO fader, which is used exclu-
sively for this task and is not affected by the Layers or Fader modes.

Grouping Master Faders

The Stereo Out fader can be grouped with the faders of other Output Channels. See
"Grouping Output Channel Faders" on page 106 for more information.
02R96—Owner's Manual
The Stereo Out can be muted by using the STEREO [ON] button, which is used
exclusively for this task and is not affected by the Layers. Its indicator lights up
when the Stereo Out is on.
0
5
10
15
20
30
40
50
60
70
STEREO