Yamaha 02R96 Owner's Manual page 258

REVERB 5.1
One input, six output reverb for 5.1 surround, with surround panning.
Parameter Range
REV TIME
0.3–99.0 s
REV TYPE
Hall, Room, Stage, Plate
HI. RATIO
0.1–1.0
DIFF.
0.0–1.0
DENSITY
0–100%
THRU, 21.2 Hz–8.00
HPF
kHz
50.0 Hz–16.0 kHz,
LPF
THRU
DIV.
0–100%
ROOMSIZE
0.1–20.0
POS L/R
L63–R63
POS F/R
F63–R63
POS CTRL
OFF, NOR, INV
ER L/R
L63–R63
ER F/R
F63–R63
ER LVL
0–100
ER CTRL
OFF, NOR, INV
REV L/R
L63–R63
REV F/R
F63–R63
REV LVL
0–100
REV CTRL
OFF, NOR, INV
1. When set to NOR, the position can be set by using the Joystick so long as the SELECTED CHANNEL
PAN/SURROUND [EFFECT] button's indicator is on. When set to INV, the Joystick will work inverse-
ly. When set to OFF, Joystick control is off.
OCTA REVERB
Eight input, eight output reverb.
Parameter Range
REV TIME
0.3–99.0 s
REV TYPE
Hall, Room, Stage, Plate
INI. DLY
0.0–100.0 ms
HI. RATIO
0.1–1.0
LO. RATIO
0.1–2.4
DIFF.
0.0–1.0
DENSITY
0–100%
THRU, 21.2 Hz–8.00
HPF
kHz
50.0 Hz–16.0 kHz,
LPF
THRU
E/R BAL.
0–100%
Effects Parameters
Description
Reverb time
Reverb type
High-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Divergence determines how the front center signal is fed to
the Left, Right, and Center channels. When set to 0%, it's
fed only to the Left and Right channels (i.e., Phantom Cen-
ter). When set to 50%, it's fed equally to the Left, Right, and
Center channels. When set to 100%, it's fed to only the
Center channel (i.e., Real Center).
Size of simulated room's reverb
Left/right listening position
Front/rear listening position
1
Left/right early reflections position
Front/rear early reflections position
Early reflections level
1
Left/right reverb position
Front/rear reverb position
Reverb level
1
Description
Reverb time
Reverb type
Initial delay before reverb begins
High-frequency reverb time ratio
Low-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
245
02R96—Owner's Manual