Yamaha 02R96 Owner's Manual page 250

REV+SYMPHO.
One input, two output reverb and symphonic effects in parallel.
Parameter Range
INI. DLY
0.0–500.0 ms
REV TIME
0.3–99.0 s
HI. RATIO
0.1–1.0
DIFF.
0.1–1.0
DENSITY
0–100%
THRU, 21.2 Hz–8.00
HPF
kHz
50.0 Hz–16.0 kHz,
LPF
THRU
REV/SYM
0–100%
FREQ.
0.05–40.00 Hz
DEPTH
0–100%
MOD. DLY
0.0–500.0 ms
WAVE
Sine, Tri
SYNC
OFF/ON
NOTE 1
1.
REV->SYMPHO.
One input, two output reverb and symphonic effects in series.
Parameter Range
INI. DLY
0.0–500.0 ms
REV TIME
0.3–99.0 s
HI. RATIO
0.1–1.0
DIFF.
0.1–1.0
DENSITY
0–100%
THRU, 21.2 Hz–8.00
HPF
kHz
50.0 Hz–16.0 kHz,
LPF
THRU
REV BAL.
0–100%
FREQ.
0.05–40.00 Hz
DEPTH
0–100%
MOD. DLY
0.0–500.0 ms
WAVE
Sine, Tri
SYNC
OFF/ON
NOTE 1
1.
Effects Parameters
Description
Initial delay before reverb begins
Reverb time
High-frequency reverb time ratio
Spread
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and symphonic balance (0% = all reverb, 100% = all
symphonic)
Modulation speed
Modulation depth
Modulation delay time
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
Description
Initial delay before reverb begins
Reverb time
High-frequency reverb time ratio
Spread
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and symphonic reverb balance (0% = all symphonic
reverb, 100% = all reverb)
Modulation speed
Modulation depth
Modulation delay time
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
237
02R96—Owner's Manual