Effects Library - Yamaha 02R96 Owner's Manual

Effects Library

Effects settings can be stored in the Effects library, which contains 52 preset memories and
76 user memories. See page 131 for information on using the Effects.
Use the EFFECTS/PLUG-INS [DISPLAY] button to select the Effect Library
1
page.
2 Press the EFFECTS/PLUG-INS [INTERNAL EFFECTS] button, and use the
EFFECTS/PLUG-INS [1–4] buttons to select the internal effects processors.
When storing, the settings of the currently selected internal effects processor, indicated in
the upper-left corner, are stored to the selected memory.
EFFECT NAME: This is the name of the previously recalled Effects memory.
TYPE: This is the effects type used in the previously recalled Effects memory. Its I/O con-
figuration is shown below this.
Level meters: These meters indicate the output levels of the currently selected Effects
processor. There are eight output meters for Effects processor #1, and two output meters for
Effects processors #2 through #4.
EFFECT TYPE: This is the effects type in the selected memory. Its I/O configuration is
shown below this.
For details on the Store, Recall, Title Edit, and Clear functions, see "General Library Oper-
ation" on page 122.
125
Effects Library
02R96—Owner's Manual