Yamaha 02R96 Owner's Manual page 24

SELECTED CHANNEL Section
DISPLAY
FOLLOW PAN
DISPLAY
DISPLAY
EQ ON
The subsections of the SELECTED CHANNEL section are explained below.
ROUTING
A
ROUTING DISPLAY button
This button is used to select the following pages: Input Channel Routing, Bus to Stereo, and
Bus to Stereo Library. See "Routing Input Channels" on page 66 and "Sending Bus Outs to
the Stereo Out" on page 78 for more information.
B
FOLLOW PAN button
This button determines whether or not the currently selected Input Channel's pan setting
is applied to the Bus Outs. Its indicator lights up when it's pressed. See "Routing Input
Channels" on page 66 for more information.
C
STEREO button
This button is used to route the currently selected Input Channel to the Stereo Out. Its indi-
cator lights up when it's pressed. See "Routing Input Channels" on page 66 for more infor-
mation.
D
DIRECT button
This button is used to route the currently selected Input Channel to its Direct Out. Its indi-
cator lights up when it's pressed. See "Routing Input Channels" on page 66 for more infor-
mation.
E
ROUTING 1–8 buttons
These buttons are used to route the currently selected Input Channel to the Bus Outs. The
button indicators of Bus Outs to which the Input Channel is routed light up. See "Routing
Input Channels" on page 66 for more information.
SELECTED CHANNEL
ROUTING
DISPLAY ACCESS
1 2
3 4
PHASE / DELAY
INSERT
PAN / SURROUND
5 6
DISPLAY
7 8
L
STEREO DIRECT L R
ODD
DYNAMICS
GATE / COMP
GATE ON COMP ON
GATE THRESHOLD
COMP THRESHOLD
EQUALIZER
LOW LOW MID
FREQUENCY FREQUENCY
Q Q
GAIN GAIN
dB
125 1.00
Hz
kHz
1 ROUTING
DISPLAY
2
FOLLOW PAN STEREO
Control Surface
R
LINK
EVEN
RANGE ATTACK DECAY
RATIO ATTACK RELEASE
HIGH MID
FREQUENCY FREQUENCY
Q Q
GAIN
dB dB
4.00 10.0
Hz Hz
kHz kHz
1 2
5
3 4
5 6
7 8
DIRECT
3 4
11
GRAB EFFECT
HOLD
GAIN
HIGH
GAIN
dB
Hz
kHz
02R96—Owner's Manual