Configuring Pro Tools - Yamaha 02R96 Owner's Manual

170
Chapter 18—Pro Tools Remote Layer
Configuring Pro Tools
Pro Tools needs to be configured as follows. For more information, see your Pro Tools doc-
umentation.
Launch Pro Tools.
1
Choose OMS Studio Setup from the Setups menu, and configure OMS as nec-
2
essary.
This screen shot shows the Yamaha USB MIDI
driver with eight ports. An OMS-compatible
device profile for the 02R96 is included on the
02R96 CD-ROM. See the included documen-
tation for more information.
Choose Peripherals from the Setups menu.
3
When the Peripherals window appears, click the MIDI Controllers button.
4
Select HUI as the Type of controller.
5
6 Select the Receive From and Send To ports, and then click OK.
The 02R96 can emulate up to three typical 8-channel Pro Tools MIDI controllers. A single
MIDI port is required for every eight channels. So you must configure MIDI Controller #2
to use channels 9 through 16, and configure MIDI Controller #3 to use channels 17 through
24.
02R96—Owner's Manual