Sending Bus Outs To The Stereo Out; Viewing Bus Out Settings; Naming Bus Outs - Yamaha 02R96 Owner's Manual

78
Chapter 9—Bus Outs

Sending Bus Outs to the Stereo Out

Bus Outs can be routed to the Stereo Out buses as follows. Bus Out to Stereo Out settings
can be stored in the Bus to Stereo library, which contains 1 preset memory and 32 user
memories. See "Bus to Stereo Library" on page 126 for more information.
Use the SELECTED CHANNEL ROUTING [DISPLAY] button to locate the Bus
1
to Stereo page.
Use the cursor buttons to select the parameters, and use the Parameter
2
wheel, INC/DEC buttons, and [ENTER] button to set them.
PAN: These controls are used to pan the Bus Out signals between the left and right Stereo
Out buses. The currently selected Pan control can be set to center by pressing [ENTER].
ON/OFF: These buttons are used to turn on and off the Bus Out to Stereo Out routing.
Faders: These faders are used to set the Bus Out to Stereo Out levels. Fader knobs appear
highlighted when faders are set to 0.0 dB.

Viewing Bus Out Settings

Parameter and fader settings for each Bus Out can be viewed and set on the View pages. See
"Viewing Channel Parameter Settings" on page 108 and "Viewing Channel Fader Settings"
on page 109 for more information.

Naming Bus Outs

Bus Outs can be named for easy identification. See "Naming Channels" on page 112 for
more information.
02R96—Owner's Manual