2
Notes for your safety
Please read and pay attention to the safety instructions prior to using the product.
2.1
General safety instructions
Only use accessories and options that are specifically suited for combination with the
product and that meet the performance and safety requirements.
The PC used must comply with the standard IEC 60950-1 or IEC 62368-1, respectively.
If you wish to connect more than one device or applied part, you must always
observe their safety instructions.
Report all serious incidents that have occurred in connection with this product to the
manufacturer and your national competent authority.
2.2
Danger for users, patients, and third parties
Electric shock due to unsuitable power connection, incorrect handling of the
product, or damage to product components
Minor injuries are possible.
• Prior to each use, check the device and cable for damage. Do not operate the
device if you notice any damage. Check the device for leak tightness (see chapter
"3.6.2 Performing a leakage test" on page 22). Do not operate the device if the
leakage test is failed. In this case, clean and disinfect the device and send it to
ATMOS for repair.
Notes for your safety
15