Changing The Printer Mode - Epson SureColor F2270 User Manual

6. Use a dry cleaning cloth to wipe away any ink cleaning solution or dust remaining on the encoder
strip (carriage scale).
7. Close the printer cover.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Related tasks
Using the Ink Cleaning Solution

Changing the Printer Mode

Change the printer's color mode if you will not use White ink for a longer period of time and when using
White ink in the printer again.
Note:
• You cannot change the printer mode if High speed color mode was selected during initial setup.
• When you switch to White ink mode after using Color ink mode for a long time, the density of the White
ink may be low. See the link below.
Preparation
Depending on the color mode you are changing to, prepare the following:
• If you are changing from Color ink mode to White ink mode, you need two White ink packs.
• If you are changing from Color ink mode to White ink mode for the first time, you need an ink charging
unit. It is not required for the second and subsequent changes.
• If you are changing from White ink mode to Color ink mode, you need two cleaning liquid packs.
Note: Except for White ink and cleaning liquid ink packs, prepare new ink when ink packs are running
low.
1. Turn on the printer, if necessary.
2. Select Menu > General Settings > Printer Settings > Printer Mode.
3. Follow the on-screen instructions and then select Start.
Note: Select How To... on the screen to view the steps.
Maintenance
136