Omron NX1P2 Series Hardware User Manual page 44

Related Manuals
Manual name
NJ/NX-series
CPU Unit
®
Built-in EtherCAT Port
User's Manual
NJ/NX-series
CPU Unit
™
Built-in EtherNet/IP Port
User's Manual
NJ/NX-series
Troubleshooting Manual
Sysmac Studio Version 1
Operation Manual
NX-series
®
EtherCAT Coupler Unit
User's Manual
NX-series
Data Reference Manual
NX-series
NX Units
User's Manual
42
Cat. No. Model numbers
W505 NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
W506 NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
W503 NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
W504 SYSMAC
-SE2£££
W519 NX-ECC£££
W525 NX-££££££
W521 NX-ID££££
NX-IA££££
NX-OC££££
NX-OD££££
NX-MD££££
W522 NX-AD££££
NX-DA££££
W592 NX-HAD£££
W566 NX-TS££££
NX-HB££££
W523 NX-PD1£££
NX-PF0£££
NX-PC0£££
NX-TBX01
W524 NX-EC0£££
NX-ECS£££
NX-PG0£££
W540 NX-CIF£££
W565 NX-RS££££
W567 NX-ILM£££
Application
Using the built-in Information on the built-in EtherCAT
EtherCAT port on an port is provided.
NJ/NX-series CPU This manual provides an introduction
Unit. and provides information on the con-
figuration, features, and setup.
Using the built-in Information on the built-in
EtherNet/IP port on EtherNet/IP port is provided.
an NJ/NX-series Information is provided on the basic
CPU Unit. setup, tag data links, and other fea-
tures.
Learning about the Concepts on managing errors that
errors that may be may be detected in an NJ/NX-series
detected in an Controller and information on individ-
NJ/NX-series Con- ual errors are described.
troller.
Learning about the Describes the operating procedures
operating procedures of the Sysmac Studio.
and functions of the
Sysmac Studio.
Learning how to use The following items are described:
the NX-series Ether- the overall system and configuration
CAT Coupler Unit methods of an EtherCAT Slave Ter-
and EtherCAT Slave minal (which consists of an NX-ser-
Terminals. ies EtherCAT Coupler Unit and NX
Units), and information on hardware,
setup, and functions to set up, con-
trol, and monitor NX Units through
EtherCAT.
Referencing lists of Lists of the power consumptions,
the data that is re- weights, and other NX Unit data that
quired to configure is required to configure systems with
systems with NX-ser- NX-series Units are provided.
ies Units.
Learning how to use Describes the hardware, setup meth-
NX Units. ods, and functions of the NX Units.
Manuals are available for the follow-
ing Units.
Digital I/O Units, Analog I/O Units,
System Units, Position Interface
Units, Communications Interface
Units, Load Cell Input Unit, and IO-
Link Master Units.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
Description