Omron NX1P2 Series Hardware User Manual page 85

Electrical and Mechanical Specifications
The electrical and mechanical specifications are given below.
Model
Enclosure
Dimensions (mm)
*2
Weight
Unit power sup-
ply
Power supply to
the NX Unit pow-
er supply
I/O power supply to NX Units
External connec-
tion terminals
*1. Includes the End Cover, and does not include projecting parts.
*2. Includes the End Cover. The weight of the End Cover is 82 g.
*3. Includes the SD Memory Card and Option Board. The NX Unit power consumption to NX Units is not includ-
ed.
*4. The inrush current may vary depending on the operating condition and other conditions. Therefore, select
fuses, breakers, and external power supply devices that have enough margin in characteristic and capacity,
considering the condition under which the devices are used.
*5. The amount of current that can be passed constantly through the terminal. Do no exceed this current value
when you use a through-wiring for the Unit power supply.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
Item
NX1P2-££40DT£
Mounted in a panel
154 × 100 × 71 mm (W×H×D)
*1
NX1P2-££40DT: 650 g
NX1P2-££40DT1: 660 g
Power supply 24 VDC (20.4 to 28.8 VDC)
voltage
Unit power con- NX1P2-££40DT: 7.05 W
NX1P2-££40DT1: 6.85 W
*3
sumption
For cold start at room temperature:
10 A max./0.1 ms max.
*4
Inrush current
and
2.5 A max./150 ms max.
Current capacity 4 A max.
of power supply
*5
terminal
No isolation: between the Unit power supply terminal and internal cir-
Isolation method
cuit
NX Unit power 10 W max.
supply capacity
NX Unit power 80%
supply efficiency
No isolation: between the Unit power supply terminal and NX Unit
Isolation method
power supply
Not provided
Communications RJ45 for EtherNet/IP Communications × 1
connector RJ45 for EtherCAT Communications × 1
For Unit power supply input, grounding, and input signal: 1 (Remova-
Screwless clamp-
ble)
ing terminal block
For output signal: 1 (Removable)
Output terminal Not provided
(service supply)
RUN output termi- Not provided
nal
NX bus connector 8 NX Units can be connected
Option board slot 2
Specification
NX1P2-9£24DT£
130 × 100 × 71 mm (W×H×D)
NX1P2-9£24DT: 590 g
NX1P2-9£24DT1: 590 g
NX1P2-9£24DT: 6.70 W
NX1P2-9£24DT1: 6.40 W
*6
1
3 Configuration Units
3-3
3