Omron NX1P2 Series Hardware User Manual page 148

5 Installation and Wiring
Process
Recording Power Turned ON and
Power Interrupted events
*1. Refer to NJ/NX-series Troubleshooting Manual (Cat. No. W503) for information on the Power Supply Error,
CPU Unit Error, Hardware Initialization Error, and System Initialization Error.
Operating Mode at Startup
The system will immediately enter RUN mode if RUN mode (default) is set as the startup operating
mode. The system will immediately enter PROGRAM mode if PROGRAM mode is set as the startup
operating mode.
•
RUN Mode Set as Startup Mode
Power supply
Operating mode
RUN indicator
5-4
The Power Turned ON and Power Interrupted events are record-
ed.
CPU Unit Startup
Time at Power ON
Startup RUN mode
Flashing Lit
Description
•
PROGRAM Mode Set as Startup Mode
Power supply
CPU Unit Startup
Time at Power ON
Operating mode Startup
RUN indicator Flashing
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
PROGRAM mode
Not lit