Table of Contents
Advertisement
System Operation
Setting Date and Time
Date and time must be set manually.
To set data and time:
1.
Turn on the display to show Welcome screen.
2.
Tap the date and time on top of Welcome screen ONE time:
From the
Welcome screen,
press the Date
and time three
times to enter set
date and time.
Figure 18. Welcome Screen - Setting Date and Time
3.
Date and Time screen will appear. Select "Set date" and enter the
appropriate date.
4.
Select "Set time" and enter the appropriate time.
Figure 19. Date and Time Screen - Settings
Select:
• Manually set the date.
• Manually set the time.
Make sure the following are set:
• Automatic = OFF
• Automatic time zone = disabled
NOTE: The display is not a mobile
device; there is no way for display
to use automatic time zone.
29
Advertisement
Table of Contents
