Nonin Sensmart H500 Operator's Manual page 40

Model
8004CA
8004CB
8004CB-NA
8204CA
8006CA/8006PI
INT-100
INT-200
WARNING: Use the Model H500 only with charger supplied by Nonin
Medical.
WARNING: The use of signal processors, sensors, accessories, and
cables other than those in the Parts and Accessories List may or will
result in increased electromagnetic emission and/or decreased immunity
of this device.
WARNING: Use only Nonin-branded oximeter sensors. These sensors are
manufactured to meet the accuracy specifications for Nonin oximeters.
Using other manufacturers' sensors can result in improper oximeter
performance.
34
Description
Single-Patient Use, Non-Sterile, Disposable Regional
Oximetry Sensor
Single-Patient Use, Non-Sterile, Disposable Regional
Oximetry Sensor
Non-Adhesive, Single-Patient Use, Non-Sterile, Disposable
Regional Oximetry Sensor
Single-Patient Use, Non-Sterile, Disposable Regional
Oximetry Sensor
Reusable, Regional Oximetry Sensor and Single Patient
Use, Disposable Patient Interface
Intermediate Cable
NOTE: For use with 8204CA only.
Intermediate Cable
NOTE: For use with SenSmart SpO
Parts and Accessories
-only sensors only.
2