Figure 6. D-Hh Display; Table 4. H500 Features - Nonin Sensmart H500 Operator's Manual

System Components and Set Up
No.
1
Event Mark Button
Momentarily pressing this button marks an event in memory. Events are
denoted by increasing numbers.
Pressing this button for 0.5 seconds starts a new patient record.
2
On/Off,Sleep Button
• On – Pressing this button once turns on the display. Each time the
display is turned on, it activates the signal processor.
• Sleep– Quickly press the On/Off button to turn both display and
signal processor is off.
• Off (Long-Term Storage Mode) – For information on putting
display into long-term storage mode, see "Placing Device in Long-
Term Storage Mode" section on page 25.
3
Display Charging Port
See "Charging the System" section on page 23 for charging instructions
and battery life information.
1

Figure 6. D-HH Display

Table 4. H500 Features

3
Description
2
17