Figure 7. D-Hh Display; Table 4. D-Hh Features - Nonin CO-Pilot H500 Operator's Manual

No.
1
Event Mark Button
Single Press: Places an event mark with the indicated number into the
data file.
Hold Press: Creates a new data file for the current session.
2
On/Off,Sleep Button
• On – Pressing this button once turns on the display. Each time the
display is turned on, it activates the signal processor.
• Sleep– Quickly press the On/Off button to turn both display and
signal processor off.
• Off (Long-Term Storage Mode) – For information on putting
display into long-term storage mode, see "Placing Device in Long-
Term Storage Mode" section on page 28.
3
Display Charging Port/Download Port
See "Charging the System" section on page 27 for charging instructions
and battery life information.
20
1

Figure 7. D-HH Display

Table 4. D-HH Features

System Components and Set Up
3
Description
2