Inspection Of Fouling Of Coolers; After Work With Front Implements And In Case Of Cooler Clogging; Tyres And Wheels; Short Functional Test - Zetor FORTERRA HSX 120 Operator's Manual

PREVENTIVE DAILY MAINTENANCE

Inspection of fouling of coolers

After opening the front hood, check that the fins of all installed radiators and the air conditioning condenser
are not clogged.
If they are clogged, clean the radiator fins with compressed air.

After work with front implements and in case of cooler clogging

After working with front-mounted machines:
- Check the tightness of the connections of the external hydraulic circuit of the front three-point hitch control
- Carry out air filter maintenance
- Check the radiators for clogging
If the radiators are clogged:
- Release and slide the air conditioning condenser to the right side of the tractor
- Clean the front sides of the engine radiator (gearbox radiators, air conditioning condenser) with
compressed air (blow air in the direction away from the engine)
- Remove residual dirt from under the hood to prevent its repeated intake.

Tyres and wheels

Check the air pressure in the front and rear tyres.
Depending on the character of work adjust the pressure to
the recommended value. Check and if necessary retighten
the bolts of the front and rear wheels.
Never drive with loose wheel bolts!
FCL20S5010

Short functional test

After starting the engine check whether the hydrostatic
steering failure, engine lubrication and charging indicators
have gone off.
Verify the function of the hydraulic steering circuits and
check them for leaks.
PCLPN016
32