Stopping The Tractor - Manual Brake; Stopping The Engine - Zetor FORTERRA HSX 120 Operator's Manual

Stopping the tractor - manual brake

Stop the tractor slowly under standard conditions. Shortly before stopping:
1. Depress the clutch pedal.
2. Shift the main gear shifting lever to neutral position.
3. With every stopping, secure the tractor against spontaneous dead start by manual brake.

Stopping the engine

After working on the tractor, when the engine has been fully loaded, it is necessary to ensure its cooling.
1. Before stopping the engine, decrease the speed to 800 - 1,000 rpm and let it run without load for about
5 minutes.
2. Move the manual throttle lever to the minimum fuel supply position.
3. The engine stops after turning the key from position 'I' to position '0'.
Attention! When the engine is switched off, the engine control unit remains active for about 2
minutes because of storage of operation data. During this time the supply of current from the
accumulator must not be interrupted. Do not disconnect the accumulator before this time expires.
120
DRIVING OPERATION
FCL20S5022
FCL20S5023