Inspection Of Fouling Of Coolers; After Work With Front Implements And In Case Of Cooler Clogging; Tyres And Wheels; Short Functional Test - Zetor PROXIMA GP Series Operator's Manual

Inspection of fouling of coolers

Open the front cowl and check the plates of the engine radiator of engine cooling liquid and air conditioning
condenser, the cooler of oil of the front PTO shaft and the cooler of the gear oil (if the tractor is equipped with
them) for fouling. In case of fouling clean the cooler plates with pressure air.

After work with front implements and in case of cooler clogging

After working with front-mounted implements:
- Check the leakage of the connections of the front three-
point hitch control external hydraulic circuit
- Perform the air cleaner maintenance
- Check the radiators clogging
In case of the radiators clogging:
- Release and slide the radiator to the left side of the
tractor
- Clean the engine radiator front walls (gearbox radiator,
air conditioning condenser) with compressed air (blow air
in the direction from the engine)
- Remove remaining dirt from underneath so as not to re-
suck it

Tyres and wheels

Check the air pressure in the front and rear tyres.
Depending on the character of work adjust the pressure to
the recommended value. Check and if necessary retighten
the bolts of the front and rear wheels.
Never drive with loose wheel bolts!

Short functional test

After starting the engine check whether the hydrostatic
steering failure, engine lubrication and charging indicators
have gone off.
Verify the function of the hydraulic steering circuits and
check them for leaks.
32
PREVENTIVE DAILY SERVICE
C113
PCLPN015
PCLPN016