Setting Automatic Disengagement Of Pto Shaft Clutch - Display Description; Automatic Disengagement Of Pto Shaft Clutch - Return To Basic Setting - Zetor FORTERRA HSX 120 Operator's Manual

DRIVE OF AGRICULTURAL MACHINERY

Setting automatic disengagement of PTO shaft clutch - display description

PHS18N021
Gradually press the buttons (C) and (D) to display the screen of automatic switching off of the PTO shaft on
the instrument panel.
The following values are displayed on the screen:
OFF-LIMIT (1) - position of arms of the rear three-point hinge where the clutch of PTO shaft is deactivated
ON (2) - the current position of arms of the rear three-point hinge
ON-LIMIT (3) - position of arms of the rear three-point hinge where the clutch of PTO shaft is activated
The values of individual items are percents from the total stroke of hydraulic arms, the maximum stroke is
100%.

Automatic disengagement of PTO shaft clutch - return to basic setting

The main values set by the manufacturer are as follows:
OFF LIMIT - 55
ON LIMIT - 45
If the screen is displayed, the main values are set by pressing the button (A) on the instrument panel.
135