Table of Contents
Advertisement
FMS-2000C
Changing the occupancy state for the primary space
Changing the occupancy state for the monitored spaces can help save energy by reducing the temperature and air changes when the
room is unoccupied.
1.
On the home screen, tap the User Menu icon.
2.
On the MENU screen, tap Room.
3.
On the Primary screen, expand Occupancy and tap Unoccupied.
4.
To confirm the new occupancy settings, tap the Checkmark icon.
Adjusting the occupancy state for the secondary space
1.
On the home screen, tap the User Menu icon.
On the MENU screen, tap Room.
2.
3.
To switch to the secondary monitored space, tap Secondary.
On the Secondary screen, expand Occupancy and tap Unoccupied.
4.
5.
To confirm the new occupancy settings, tap the Checkmark icon.
Quick links
Use the quick link icons on the home screen to quickly access the isolation mode, cleaning mode, temperature, 360° Safety Halo, and
alarm mode.
Activating and deactivating the cleaning mode
1.
On the home screen, tap the Clean icon to initiate the cleaning process. A Start and Stop icon appears.
2.
Tap the Start icon to initiate the cleaning mode.
3.
Optional: If you want to stop the cleaning process before the timer runs out, tap the Fan icon. On the WARNING! screen, tap the
Checkmark icon to confirm that you want to stop the cleaning process.
Note: If you stop the cleaning process before its completion, the room cannot be cleaned sufficiently.
Adjusting the temperature within the comfort range
1.
On the home screen, tap the Temperature icon.
2.
To increase the temperature, tap the Up icon.
3.
To decrease the temperature, tap the Down icon.
4.
To save the new settings, tap the Checkmark icon.
Adjusting the 360° Safety Halo and brightness
1.
On the home screen, tap the Halo icon.
2.
On the Safety Halo screen, switch Enabled on and expand it.
3.
To adjust the brightness, move the slider to increase or decrease Brightness.
To confirm the new settings, tap the Checkmark icon.
4.
Adjusting the nightly auto dim and dimmed period
1.
On the home screen, tap the Halo icon.
2.
On the Safety Halo screen, switch Nightly Auto Dim on and expand it.
3.
To adjust how much the light of the 360° Safety Halo is dimmed, move the slider to increase or decrease the Dimmed Level.
4.
To adjust the period of time in which you want to dim the light of the 360° Safety Halo, tap Dimmed Period and scroll to change the
start and end time.
5.
To confirm the new settings, tap the Checkmark icon.
Adjusting the alarm mode quick links
1.
On the home screen, tap the Alarm icon. A pop up appears and you can choose from the following alarm modes:
•
Audible Alarm
Muted Alarm
•
•
Night Mode
2.
To change the setting, tap one of the alarm modes.
Adjusting the isolation mode quick link
1.
On the home screen, tap the Isolation Mode quick link.
2.
To change the isolation mode, tap Positive, Negative or Neutral.
3.
To confirm the new settings, tap the Checkmark icon.
59
LIT-12013504
Advertisement
Table of Contents
Need help?
Do you have a question about the FMS-2000C and is the answer not in the manual?