Table of Contents
Advertisement
FMS-2000C
Configuring the action mode
In direct acting mode, the alarm relay activates when the sensor input exceeds the high setpoint and deactivates when the sensor input
falls below the low setpoint. In reverse acting mode, the alarm relay activates when the sensor input falls below the low setpoint and
deactivates when the sensor input exceeds the high setpoint.
1.
On the home screen, tap the Settings icon to enter the Settings menu.
2.
To view relay settings, tap Relay.
3.
To find the relay you want to configure the action mode for, swipe left.
4.
On the RELAY screen, expand Action Mode and choose from the following options:
•
Direct Acting
•
Reverse Acting
To confirm the new setting, collapse Action Mode.
5.
Setting up a delay
1.
On the home screen, tap the Settings icon to enter the Settings menu.
To view relay settings, tap Relay.
2.
3.
To find the relay you want to set up a delay for, swipe left.
4.
On the RELAY screen, expand Action Mode and move the slider to set a delay time of up to 180 seconds.
5.
Optional: Tap the Revert icon to revert back to the previous delay time.
6.
To confirm the new setting, collapse Action Mode.
Configuring the trigger mode for Isolation Mode
1.
On the home screen, tap the Settings icon to enter the Settings menu.
To view relay settings, tap Relay.
2.
3.
To find the relay you want to configure the trigger mode for, swipe left.
On the RELAY screen, expand Trigger Mode and tap Isolation Mode. See Table 6 for more information.
4.
5.
To confirm the new setting, collapse Trigger Mode.
Adjusting the type of isolation mode
1.
On the home screen, tap the Settings icon to enter the Settings menu.
2.
To view relay settings, tap Relay.
3.
To find the relay you want to adjust the type of isolation mode for, swipe left.
4.
On the RELAY screen, expand Isolation Mode and choose from the following options:
•
Positive
•
Negative
•
Neutral
5.
To confirm the new setting, collapse Isolation Mode.
Configuring the action mode
In direct acting mode, the alarm relay activates when the sensor input exceeds the high setpoint and deactivates when the sensor input
falls below the low setpoint. In reverse acting mode, the alarm relay activates when the sensor input falls below the low setpoint and
deactivates when the sensor input exceeds the high setpoint.
1.
On the home screen, tap the Settings icon to enter the Settings menu.
2.
To view relay settings, tap Relay.
3.
To find the relay you want to configure the action mode for, swipe left.
4.
On the RELAY screen, expand Action Mode and choose from the following options:
•
Direct Acting
•
Reverse Acting
5.
To confirm the new setting, collapse Action Mode.
Setting up a delay
1.
On the home screen, tap the Settings icon to enter the Settings menu.
To view relay settings, tap Relay.
2.
3.
To find the relay you want to set up a delay for, swipe left.
On the RELAY screen, expand Action Mode and move the slider to set a delay time of up to 180 seconds.
4.
5.
Optional: Tap the Revert icon to revert back to the previous delay time.
To confirm the new setting, collapse Action Mode.
6.
46
LIT-12013504
Advertisement
Table of Contents
Need help?
Do you have a question about the FMS-2000C and is the answer not in the manual?