1. Manuals
  2. Brands
  3. Johnson Controls Manuals
  4. Controller
  5. FMS-2000C
  6. User manual

Specifying The Action Mode For Co Control; Selecting The Corresponding Analog Input Channel For Co Control; Setting Up Limits For Co Control - Johnson Controls FMS-2000C User Manual

Critical environment controller
Hide thumbs Also See for FMS-2000C:
Table of Contents

Advertisement

FMS-2000C
Specifying the action mode for CO
The action mode determines the polarity of the output based on sensor input. To specify the action mode, complete the following steps:
1.
On the home screen, tap the Settings icon to enter the Settings menu.
2.
To view analog input settings, tap Analog I/O.
3.
To find the analog output you want to change the action mode for, swipe left.
4.
On the ANALOG screen, tap Output.
5.
To specify the action mode, tap the Action Mode arrow and tap Direct or Reverse.
6.
Collapse Action Mode to save the new settings.
Selecting the corresponding analog input channel for CO
Map the corresponding analog input channel to the analog output channel.
1.
On the home screen, tap the Settings icon to enter the Settings menu.
To view analog input settings, tap Analog I/O.
2.
3.
To find the analog output you want to change the analog input channel for, swipe left.
On the ANALOG screen, tap Output.
4.
5.
To select a corresponding analog input channel for this analog output, tap the Input Channel arrow.
6.
Scroll to the corresponding analog input channel and tap the Checkmark icon to confirm your settings.
Setting up limits for CO
Limits prevent the analog output from going beyond a predetermined voltage or current output. You can specify the minimum and
maximum limits for the analog output in percentage. The default minimum is zero and the default maximum is 100%.
1.
On the home screen, tap the Settings icon to enter the Settings menu.
2.
To view analog input settings, tap Analog I/O.
3.
To find the analog output you want to change the limit for, swipe left.
4.
On the ANALOG screen, tap Output.
To set an upper and lower limit, tap the Limit arrow.
5.
6.
Move the sliders towards the Plus icon to increase or towards the Minus icon to decrease the Upper and Lower Limit.
To confirm the new settings, tap the Checkmark icon.
7.
control
2
control
2
control
2
41
LIT-12013504

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FMS-2000C and is the answer not in the manual?

Questions and answers

Related Manuals for Johnson Controls FMS-2000C

Related Products for Johnson Controls FMS-2000C

Table of Contents