Modifying Or Deleting Permit Telephone Numbers - Xerox FAX System (J) Operation Manual

Section 5 Other Features of this Fax
Modifying or Deleting Permit Telephone
Numbers
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
Perform steps 1 through 3 of "Registering New Permit
Telephone Numbers" on page 5-42.
2
Press the key which displays the Permit Telephone
Number you want to modify or delete.
(inch)
(metric)
3
If you want to delete the registered Permit Telephone
Number, press the "Delete" key and then go to the next
step. If you want to modify the registered information,
press the "Change contents" key and then go directly to
step 5.
(inch)
(metric)
5-44
> Deleting a Permit Telephone Number
4
Press the "Yes" key.
The message display will return to the same screen as
was displayed in step 2. If you are finished deleting
Permit Telephone Numbers, press the Reset key.
> Modifying information
5
Press the Stop/Clear key to delete the old number and
then enter the new Permit Telephone Number, or use the
" " and/or " " keys to move the cursor to a desired
location and reenter the number as desired. Pressing the
"Delete" key will delete the number directly above the
cursor.
(inch)
(metric)
6
Press the "OK" key.
The message display will return to the same screen as
was displayed in step 2. Once you are finished modifying
and/or deleting Permit Telephone Numbers, press the
Reset key.