Turning The Bulletin Board On/Off (Bulletin Board Setting) - Xerox FAX System (J) Operation Manual

Turning the Bulletin Board ON/OFF (Bulletin Board setting)

If you use the Bulletin Board function, you only need to enter documents into memory once and they will be available for transmission to any
number of receiving parties upon receipt of their polling request. (Refer to "Preparing Documents for a Polling Transmission", page 5-8.) In
order to use the Bulletin Board function, it is necessary to turn it ON here in advance.
* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1
Press the Default key. The Default Setting screen will
appear.
2
Press the "Fax default" key.
(inch)
(metric)
3
Press the " " cursor key until "Bulletin Board" is
highlighted.
4
Press the "Change #" key.
Section 7 Various Settings and Registration
5
Select whether you want to turn the Bulletin Board
function ON or OFF. Press the "Save doc. after Tx" key to
turn it ON and the "Del. doc. after Tx" key to turn it OFF.
* If you select "Del. doc. after Tx", the documents to be
deleted from memory after they are transmitted once. If
you select "Save doc. after Tx", the documents will
remain in memory waiting for the next polling request
even after they are transmitted.
(inch)
(metric)
6
Press the "Close" key. If you are finished making settings,
press the Reset key to return to the initial mode.
7-3