Section 9 Network FAX Settings (Option)
Registering the file name (factory default setting: "RX" and
"TX")
3
Press the "File name" key.
(inch)
(metric)
4
If you want to register the file name for received faxes,
press the "NetworkFAX Rx." ["NW-FAX RX"] key. If you
want to register the file name for transmitted faxes, press
the "Save Tx. original" key.
* The procedure to register the name is the same for both
received faxes and transmitted faxes.
5
Enter the desired name using the English alphabet,
numerals or other available symbols. (Maximum 13
digits)
* Refer to "Entering Characters" on page 2-11 when
entering the file name.
(inch)
(metric)
6
Once you are finished entering the file name, press the
"End" key. The message display will return to the same
screen as was displayed in step 3.
9-8
Registering the IP address or host name
7
Press the "IP addr./Host name" key.
(inch)
(metric)
8
Enter the IP address (numerals) or the host name (using
the English alphabet or numerals). (Maximum 32 digits)
* Refer to "Entering Characters" on page 2-11 when
entering the IP address or host name. It is not possible
to use the "Space" key when entering this information.
(inch)
(metric)
9
Once you are finished entering the IP address or host
name, press the "End" key. The message display will
return to the same screen as was displayed in step 3.