3.3.
3.3.1.
34
Selection of the machine operation mode
The operation mode is selected by the three way switch.
Manual mode
Service mode
Switch the mode switch to position 0 (middle position) and press ENTER –
position 15 – to display service menu of the machine.
Scroll in the service menu using buttons
parameters by button 3 and 6.
Parameter
Band switch off
Hydraulics switch off
Band thickness
Machine operation
modes
Service mode
(pos. 10) and
Description
•
choices – up, down, never:
•
switches of the band motor if the frame is up – finishes
cutting of the material and returns to the initial position
– or if the frame is down – finishes cutting
•
or the band motor is never switched off (e.g. if cutting
short or small pieces of material).
•
choices – 10 min, never
•
switches off the hydraulic aggregate if not operational
for more than 10 minutes
•
or is not witched off – if Never is selected
•
press button 11 longer to enter the service code and
gain access for more parameters
•
service parameter
•
set according to band thickness
Automatic mode
,
(pos. 13), change
Manual version:
1.00/ May. 2010
Manual rev.:
1