Manufacturer
Esso
Fam
Fina
4.6.2.
Hydraulic oil level check
Pull up the gauge and check the state of the oil. The oil level must be situated between
water-glas.
Fill the hydraulic oil, if it is necessary. Use always the filter (10 μm or better) when you fill
the oil. You avoid impurities penetration to the hydraulic system and troubles in
hydraulic system.
4.7.
Machine cleaning
Clean the machine from the cooling liquid and impurities after every shift stopping.
Conserve the guiding surfaces, mainly:
•
Vices jaws
•
Vices guiding and vices load area
•
Feeder
•
Stand area
Type
Manufacturer
Nuto H 46
Texaco
HD 5040
Valvoline
Hydran 46
Type
Rando HD B 46
Ultramax AW 46
47