Wiring Terminal Modules For Electronic Modules - Siemens ET 200S Manual

Wiring and Fitting
Wiring Terminal Modules for Digital, Analog, and Technology Modules
The terminal assignment of the terminal module depends on which electronic
module is inserted. You will find information on this in the following chapters:
S Terminal modules in Chapter 9
S Digital electronic modules in Chapter 11
S Analog electronic modules in Chapter 12
S Process-related module: See the Process-Related Functions manual
TM-E15S26-A1 and electronic
module/process-related module
Channel 1
Channel 0
CH0 CH1
Channel 1/3
Channel 0/2
CH1/3
CH0/2
1 5
2 6
3 7
4 8
A A
4 8
A A
3 7
AUX1 bus (PE) fed through. Connection to ter-
minals A4, A8 and A3, A7.
TM-E15S24-01 and electronic module/
process-related module
Channel 1 Channel 1
Channel 0
CH0 CH0
Channel 1/3
Channel 0/2
CH1/3
CH0/2
1 5
2 6
3 7
4 8
AUX1 bus (PE) fed through. No connec-
tion to terminals 4 and 8.
Figure 5-9

Wiring Terminal Modules for Electronic Modules

5-16
TM-E15S24-A1 and elec-
tronic module
Channel 0
CH0
Channel 0/2
CH0/2
1
2
3
A
4
AUX1 bus (PE) fed through. Connec-
tion to terminals A4 and A8.
CH1
TM-E15S23-01 and elec-
tronic module
Channel 1 Channel 0
CH0
CH1
Channel 1/3 Channel 0/2
CH1/3 CH0/2
5
6
7
A
8
AUX1 bus fed through.
No connection to the ter-
minals.
TM-E15S24-AT and
2AI TC High Feature
Channel 0 Channel 1
CH0 CH1
1 5
2 6
AUX1 bus (PE) fed through. No connection
to the terminals of the terminal module.
Distributed I/O System ET 200S
Channel 1
CH1
Channel 1/3
CH1/3
1 5
2 6
3 7
EWA 4NEB 780 6024-02 07