Siemens ET 200S Manual page 336

Digital Electronic Modules
11.15 2DO 24 VDC/2 A High Feature Digital Electronic Module
(6ES7 132-4BB30-0AB0)
Order Number
6ES7 132-4BB30-0AB0
Features
S Digital electronic module with two outputs
S Output current 2 A per output
S Rated load voltage 24 VDC
S Suitable for solenoid valves, DC contactors, and indicator lights
Peculiarity
When you connect the 24 VDC rated load voltage to the power module by means
of a mechanical contact, depending on the circuit the digital outputs carry the "1"
signal for approximately 50 µs. You need to take this into account if you connect
the module to fast counters.
Terminal Assignment
The following table indicates the terminal assignment of the 2DO 24 VDC, 2 A High
Feature for the different terminal modules:
Table 11-16 Terminal Assignment of the 2DO 24 VDC/2 A High Feature
View
TM-E15S24-A1 and 2DO 24 VDC/2 A High Feature
CH0 CH1
DO DO
0
1 5
24 VDC 24 VDC
2 6
M M
3 7
A
AUX1 (e.g. PE) AUX1 (e.g. PE)
A
4 8
11-60
Terminal Assignment
2 conductors 3 conductors 4 conductors
1
When there are 4 con-
ductors, AUX1 must be
applied to PE.
Remarks
Channel 0:
Terminals 1 to A4
Channel 1:
Terminals 5 to A8
DO: Output signal
(maximum 2 A per
channel)
24 VDC: Sensor supply
M: Ground, load power
supply
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07