Siemens ET 200S Manual page 233

Updating the Firmware of the IM151-1 HIGH FEATURE
Features
S As of STEP 7 V5.1, ServicePack 3, you can update the firmware of the IM151-1
HIGH FEATURE.
S To update the firmware you receive files (*.UPD) with the current firmware.
Requirements
S The IM151-1 HIGH FEATURE in the station whose firmware is to be updated
must be accessible online.
S The files with the current firmware version must be available in the file system
of your programming device (PG)/PC.
Procedure
The STEP7 online help system provides information on how to proceed.
Note
We recommend you update the firmware using PROFIBUS-DP.
Restrictions when Operating the Modules with the IM 151 High Feature
The following modules cannot be used with the IM 151 High Feature:
1Count 24V/100kHz
1Count 5V/500kHz
1SSI
1STEP 5V/204kHz
1SI serial interface module
Modbus/USS serial interface module
2AI U High Feature
2AI I 2/4DMU High Feature
2AO U High Feature
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Module
6ES7 138-4DA02-0AB0
6ES7 138-4DE00-0AB0
6ES7 138-4DB00-0AB0
6ES7 138-4DC00-0AB0
6ES7 138-4DF00-0AB0
6ES7 138-4DF10-0AB0
6ES7 134-4LB00-0AB0
6ES7 134-4MB00-0AB0
6ES7 135-4LB00-0AB0
Up to Order Number
Interface Modules
Up to Product
Version
1
1
3
3
1
1
1
1
1
8-19