Siemens ET 200S Manual page 216

Interface Modules
Table 8-1 Parameters for the IM151-1 BASIC Interface Module
IM151-1 BASIC
Reference junction
slot
Reference junction
input
Parameters for the IM151-1 STANDARD and IM151-1 FO STANDARD Interface
Modules
Table 8-2 Parameters for the IM151-1 STANDARD and IM151-1 FO STANDARD Interface
Modules
IM151-1
STANDARD/
IM151-1 FO
STANDARD
Startup at Preset <>
Actual configuration
Replace modules
during operation
Analog-value format
Interference
frequency
suppression
Reference junction
slot 1 to 8
Reference junction
input 1 to 8
Parameters for the IM151-1 HIGH FEATURE Interface Module
Table 8-3 Parameters for the IM151-1 HIGH FEATURE Interface Module (Parameter
Assignment Tab)
IM151-1 HIGH
FEATURE
DPV1 operation
Operation at Preset
<> Actual
configuration
Diagnostic interrupt
Hardware interrupt
8-2
Value Range
None/2 to 12
RTD on channel 0/
RTD on channel 1
Value Range
Disable/enable
Disable/enable
SIMATIC S7/
SIMATIC S5
50 Hz/60 Hz
None/2 to 63
RTD on channel 0/
RTD on channel 1
Value Range
Disable/enable
Disable/enable
2
Disable/enable
2
Disable/enable
Default
None ET 200S
0 ET 200S
Default
Disable ET 200S
Disable ET 200S
S7 ET 200S
50 Hz ET 200S
None ET 200S
0 ET 200S
Default
1
Enable ET 200S
Enable ET 200S
Disable ET 200S
Disable ET 200S
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Applicability
Applicability
Applicability