Siemens ET 200S Manual page 6

Introduction
Guide to the Manual
You can quickly access specific information in the manual by using the following
aids:
S At the start of the manual you will find a complete table of contents and a list of
the diagrams and tables that appear in the manual.
S An overview of the contents of each section is provided in the left-hand column
on each page of each chapter.
S Following the appendices, you will find a glossary in which important technical
terms used in the manual are defined.
S At the end of the manual you will find a comprehensive index enabling rapid
access to the information you are looking for.
Special Note
In addition to this manual, you will also need the manual for the DP master (see
Appendix A).
Note
You will find a complete list of the contents of the ET 200S manuals in Section 1.3
of this manual. We recommend that you begin by reading this section so as to find
out which parts of which manuals are most relevant to you in helping you to do
what you want to do.
Recycling and Disposal
Due to the fact that it is low in contaminants, the ET 200S is recycleable. Contact a
certified electronic-waste disposal company to recycle and dispose of your old
equipment in an environment-friendly manner.
Additional Support
Please contact your local Siemens representative if you have any queries about
the products described in this manual.
http://www.ad.siemens.com/automation/partner
Training Center
We offer a range of courses to help get you started with the xxx and SIMATIC S7
programmable controller. Please contact your local training center or the central
training center in Nuremberg, D 90327 Germany.
Telephone:
Internet:
vi
+49 (911) 895-3200.
http://www.sitrain.com
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07