Configure Remote Authentication For Smb; At Your Workstation - Xerox WorkCentre 7335 System Administrator Manual

Configure Remote Authentication for SMB

At Your Workstation:

1. With the Authentication Configuration web page still running, click Configure next to the server you
wish to use for Authentication. If not still running, perform steps 2 and 3 below.
2. If the web page is not still running, open your Web browser and enter the TCP/IP address of the
machine in the Address or Location field. Press Enter.
3. Click the Properties tab and return to the Security folder.
4. Select the Remote Authentication Server / Directory Service folder in the list of hot links, select
Authentication System and pick SMB from the drop-down list. Click Apply.
5. Select SMB Server Settings.
6. From the SMB Server Setup drop-down menu, select your desired method. The selections include:
By Domain Name, and By Domain Name and Server Address / IP Address.
7. Enter the Domain name (up to 15 characters) in the SMB Server – Domain Name box, for every
Domain Controller specified. This entry is required regardless of the selection made from the SMB
Server Setup drop-down menu.
8. Enter the IP Address of the Domain Controller in the SMB Server – Server Name / IP Address box (if
By Domain Name and Server Address / IP Address was selected for SMB Server Setup).
9. Enter the IP Addresses of up to 4 additional Backup Domain Controllers, if applicable.
10. If you choose not to enter IP addresses, enter the Server Name (up to 64 characters) in the SMB
Server – Server Name / IP Address box (if By Domain Name and Server Address / IP Address was
selected for SMB Server Setup).
11. Click Apply, and supply the Administrator User name and password if prompted.
175