Configuring Xerox Secure Access To Work With Remote Authentication - Xerox WorkCentre 7335 System Administrator Manual

Configuring Xerox Secure Access to work with Remote Authentication

At Your Workstation:
1. Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field,
then select [Enter].
2. Click the [Properties] tab.
3. Select the [Security] folder, then the [Authentication Configuration] link.
The Properties tab refreshes and the Authentication Configuration > Step 1 of 2 area appears.
4. In the Authentication Configuration > Step 1 of 2 area:
a. Select [Xerox Secure Access] from the Login Type drop-down list.
b. Select the [Enabled] box for each service that you wish to restrict access to. For explanations of
each service, select the [Help] button.
Note: If a Guest User box is available and configurable, consider whether it is advisable in your
network environment to allow simple password, guest access to this restricted service device. The
default setting is Off.
c. Do not place a checkmark in the [Non-account Print] box if you wish to enable people without
accounts to continue to print.
d. Select [Apply], then reboot the device following the prompt.
e. Select [Next].
The Properties tab refreshes and the Authentication Configuration > Step 2 of 2 area appears.
5. In the Authentication Configuration > Step 2 of 2 area, on the Authentication System line, select
[Configure].
The Properties tab refreshes and the Authentication System area appears.
6. In the Authentication System area:
a. Settings drop-down list box, select [Authentication Agent].
b. Select [Apply], then reboot the device following the prompt.
182