802.1X Authentication; Information Checklist; Configure 802.1X With Internet Services - Xerox WorkCentre 7335 System Administrator Manual

802.1X Authentication

The multifunction device supports 802.1X authentication based on the Extensible Application Protocol
(EAP). 802.1X can be enabled for devices connected through both wired and wireless Ethernet networks.
As described here, the 802.1X configuration is used to authenticate the multifunction device, rather than
individual users. After the device has been authenticated, it will be accessible to users on the network.
The administrator can configure the machine to use one EAP type. EAP types currently supported on the
device are:
EAP-MD5
PEAPv0/EAP-MS-CHAPv2
EAP-MS-CHAPv2

Information Checklist

Create a user name and password on your authentication server which will be used to authenticate the
Xerox device.
Ensure your 802.1Xx authentication server and authentication switch are available on the network.

Configure 802.1X with Internet Services

1. Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field.
Press Enter.
2. Click the Properties tab.
3. Select the Security folder.
4. Select the 802.1X link.
5. Select (place a checkmark in) the Enabled box.
6. Select the required Authentication Method.
7. Enter the User Name and Password required by your authentication switch and server.
8. Click Apply.
9. If prompted, enter the administrator user name and password. The 11111 and x-admin.
193