Set The Ethernet Speed - Xerox WorkCentre 7335 System Administrator Manual

Set the Ethernet Speed

1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties tab.
3. Click the Connectivity folder, then the Physical Connections folder.
4. Click the Ethernet hot link.
5. Select your network speed from the drop-down list.
6. Click the Apply button to accept the changes, or the Undo button to return the settings to their
previous values.
Note: Changes to settings are not applied until you restart the Device. A Reboot Machine button is
available on the Status Tab of Internet Services.
256