Web Service (If Available); Enable The Webdav Port (For Name Space Management) - Xerox WorkCentre 7335 System Administrator Manual

Web Service (if available)

The Web Service button on the machine, if available, enables users to view Internet or Intranet web
servers on the machine's User Interface, and to send scanned files to web servers through job flow sheets,
if the server login and password are valid as entered on the job flow sheet. In addition to performing the
set up procedure described here, make sure to refer to the Proxy Server Settings topic, in the Network
Connectivity section of this guide, for instructions on setting up Proxy Server parameters (similar to
setting up connections for a standard web browser). To set up and use Job Flow Sheets with Mailboxes,
refer to that topic in the Options section of this guide.
1. Press the Log In / Out button to enter System Administration Mode.
2. On the keypad enter [11111] or the current password. Touch Enter when finished.
3. Press the Machine Status button on the Control Panel, then touch the Tools tab.
4. Use the arrow control in the Group menu to scroll to Web Browser Setup.
5. Touch Web Browser Setup.
6. Touch Access to Web Sites, then touch Change Settings.
7. Touch Enabled, then touch Save.
8. Select any other settings of interest and use the Change Settings and Save buttons, as required.
9. Touch Close to return to the Tools tab screen.

Enable the WebDAV port (for name space management)

1. Use the arrow control in the Group menu.
2. Touch Connectivity & Network Setup.
3. Touch Port Settings.
4. Scroll to WebDAV, touch the selection line, then touch Change Settings.
5. Touch WebDAV – Port Status, then touch Change Settings.
6. Touch Enabled, then touch Save.
7. Touch Close repeatedly until the Tools tab screen is displayed, then wait for the Auto Clear service to
reboot the machine.
8. Return to the WebDAV settings screen and verify that the Port Number is set to 80 and that a
Timeout value (30 or more seconds) has been set.
9. Make any changes desired, then touch Close repeatedly until the Tools tab screen is displayed.
10. Wait several seconds for the Auto Clear service to log you out.
168