File Destination / Output Destination
Received Fax documents will be routed to the output tray or Mailbox specified by these settings.
1. Press the Log In / Out button to enter System Administration Mode.
2. On the keypad enter [11111] or current password. Touch Enter when finished.
3. Press the Machine Status button on the Control Panel.
4. Touch the Tools tab.
5. Touch Fax Mode Settings.
6. Select File Destination/Output Destination.
7. Select the Box Selector – Line Setup button.
8. Touch Change Settings.
9. Make the appropriate selections and touch Save when done.
Note: If Box Selector is selected as an Output Destination, when On is selected, you will have to enter
a mailbox number, then touch Save.
10. When complete, touch Close until the Tools tab screen is displayed.
11. Wait several seconds for the Auto Clear service to log you out.
125