Anywireaslink Side Terminal Block; Transmission Cable Terminal Block - Mitsubishi Electric AnyWire NZ2AW1C2AL User Manual

4.2

AnyWireASLINK Side Terminal Block

Transmission cable terminal block

Model
*1
MC 1,5/5-STF-3,81
*1 Use the one manufactured by PHOENIX CONTACT GmbH & Co. KG. (For contact, visit www.phoenixcontact.com.)
To connect the terminal block, a flathead screwdriver having a tipped size of 0.42.5mm is required.
Before removing the transmission cable terminal block, check that the terminal block mounting screws on both ends are
completely loosened (removed from the socket).
Pulling the terminal block with excessive force while the terminal block mounting screws on both ends are still tightened may
damage the devices.
Before connecting the terminal block, check that there are no short-circuits due to the disconnected or frayed wires and
tighten the terminal block mounting screws at both ends securely. (Tightening torque: 0.2 to 0.3Nm)
Descriptions of terminals
Terminal
24V
0V
DP
DN
LG
Applicable cables
Classification Name
Transmission UL-listed general-purpose 2-wire cable (VCTF, VCT)
cable
(DP, DN)
UL-listed general-purpose wire
Dedicated flat cable
Power supply UL-listed general-purpose 2-wire cable (VCTF, VCT)
cable
UL-listed general-purpose wire
(24V, 0V)
Dedicated flat cable
4 CONNECTIONS
28
4.2 AnyWireASLINK Side Terminal Block
Description
Power supply terminal for driving the transmission circuit for the AnyWireASLINK system.
Connect to a 24VDC external power supply.
AnyWireASLINK transmission signal terminals
DP: Transmission cable (+), DN: Transmission cable (-)
Connect to the DP and DN terminals on the slave module or terminating unit.
Connected to the neutral point of the noise filter inserted between the 24V and 0V terminals.
Ground the LG terminal with the functional ground terminal (FG terminal) on the programmable controller at a single point.
Applicable tightening torque
0.2 to 0.3Nm
Wire diameter Type
2
1.25mm Stranded wire
2
0.75mm
2
1.25mm
2
0.75mm
2
1.25mm
2
0.75mm
2 2
0.75mm to 2.0mm Stranded wire
2 2
0.75mm to 2.0mm Stranded wire/
single wire
2
1.25mm Stranded wire
2
0.75mm
Material Temperature
rating
Copper wire 70 or higher
90
70 or higher
90