Features; System Configuration Of Anywireaslink - Mitsubishi Electric AnyWire NZ2AW1C2AL User Manual

Cc-link-anywireaslink bridge module

Table of Contents

1.1

Features

Seamless connection between two systems

CC-Link and AnyWireASLINK can be seamlessly connected.

CC-Link transmission speed auto-tracking

The transmission speed of the bridge module need not be set by the user since it is automatically determined according to the

transmission speed set in a master station.

Man-hour reduction by built-in terminating resistor

Since the bridge module has a built-in terminating resistor (110) of CC-Link, a terminating resistor is not necessary even

when the module is used at the end of the CC-Link network. One operation with a switch can enable/disable the built-in

terminating resistor (110).

iQ Sensor Solution functions

iQ Sensor Solution provides automatic detection of the bridge module connected via CC-Link. It also allows the parameter

setting and monitoring of the slave modules connected to AnyWireASLINK.

1.2

For the number of connectable slave modules, refer to the following.

Page 19 Performance Specifications

1 OVERVIEW

1.1 Features

Table of Contents