Requirements For Low Voltage Directive Compliance - Mitsubishi Electric AnyWire NZ2AW1C2AL User Manual

Installation environment
Use the module under the installation environment of Zone B
*1 Zone defines categories according to industrial environment, specified in the EMC and Low Voltage Directives, EN61131-2.
Zone C: Factory mains (isolated from public mains by dedicated transformer)
Zone B: Dedicated power distribution, secondary surge protection (rated voltage: 300V or less)
Zone A: Local power distribution, protected from dedicated power distribution by AC/DC converter and insulation transformer (rated
voltage: 120V or less)

Requirements for Low Voltage Directive compliance

The Low Voltage Directive does not apply to this product as it operates on 24VDC power supply.
For making the programmable controller system used comply with the Low Voltage Directive, refer to the section about EMC
and Low Voltage Directives in the user's manual for the CPU module used.
*1
.
Appendix 4 EMC and Low Voltage Directives
A
APPX
115