Setup; Bypass Setting - Delta Ultron HPH Series User Manual

7.9 Setup

There are eight shortcut buttons for you to set up the Bypass Setting, Mode Setting, Output
Setting, Battery and Charging Setting, Parallel Setting, Dry Contact Setting, General Setting
and Control respectively. Please see the figure below.
7.9.1

Bypass Setting

In the Bypass Setting screen, the administrator can set up the Bypass Frequency Range,
Bypass Voltage - Max, Bypass Voltage - Min, ECO Voltage - Max and ECO Voltage - Min. If
the range is exceeded, the system will issue an alarm. These settings must be performed by
qualified service personnel, please contact Delta service personnel for assistance.
98