Item
Reset System
7.10 Maintenance
There are seven shortcut buttons for you to check and set up the Warning, Historical Event,
Statistics, Test, Clear, Advanced Diagnosis and Version & S/N respectively. Please see the
figure below.
7.10.1
Warning
When there is a warning, the buzzer will make an alarm sound. Click the warning icon (
the Warning screen.
In the Warning screen, you can inquire the warning logs and solutions. The system can store
at maximum 200 warning logs.
NOTE:
Click the number on the right side of the warning screen (as shown in the figure
below) and enter a specific page number, you can quickly switch to the cor-
responding page and view the warning logs.
Reset the system or not.
In bypass mode, when you press the ON/ OFF button ( ) to start
up the UPS but the UPS does not respond, please select 'Reset'
to reset the system. After the system is reset, please press the
ON/ OFF button ( ) to start up the UPS.
118
Description
) to enter