Turn On The Touch Panel - Delta Ultron HPH Series User Manual

7.2 Turn on the touch panel

NOTE:
Confirm the AC mains is normal before turning on the touch panel.
1. Please refer to the following steps to turn on the touch panel.
a. Switch ON the bypass breaker, the touch panel will then light up; or
b. Switch ON the input breaker, the touch panel will then light up; or
c. Switch ON the external battery cabinet's breaker, and press the battery start button on the
rear panel of the UPS for 3 seconds and release it after you hear one beep, the touch panel
will then light up.
2. About 25 seconds after the touch panel lights up, the main screen will appear as follows. And
now, the touch panel can be used. Please note that when the main screen is shown, the login
account is User.
(Figure 7-2: Main Screen_User
82
Login)