4.1
UPS Connection & Setup
Battery Cable Connection (for Standard Runtime Model only)
1
The UPS (standard runtime model only) is shipped out from the factory
without connecting the battery cable for safety consideration. Before
installing the UPS, please follow the steps below to connect the battery
cable first.
Step 1
Remove
the Battery Cover.
UPS Input Connection
2
Plug the UPS into a two-pole, three-wire and grounded receptacle only.
Avoid using extension cords and only use the input cable provided in the
package.
UPS Output Connection
3
Connect devices to the UPS's outlet receptacles.
Communication Interface Connection
4
(Figure 4-2: Connection of USB Port, RS-232 Port and Mini Slot)
Chapter 4 : Connection
the Battery Cable.
(Figure 4-1: Battery Cable Connection)
USB Port
RS-232 Port
Step 2
Connect
Mini Slot
1 9
Step 3
Reinstall
the Battery Cover.