bL3).
5.5.3 Single Unit Wiring
NOTE:
Prior to wiring, please read 5.5.1 Precautions Prior to Wiring first.
Single Input (Single Unit)
When there is only one AC power source, single unit wiring procedures are as follows.
1.
Remove the cover shown in Figure 5-5 and you will see the wiring terminal block shown
below.
No.
Item
Main Input Terminal
Block
Bypass Terminal
Block
(Figure 5-6: Remove the Copper Bars)
(Figure 5-7: Wiring Terminal Block)
Function
Connects the main AC
source
Connects the Bypass
source
36
Description
Includes three-phase (mL1, mL2,
mL3) and neutral (mN) terminals.
Includes three-phase (bL1, bL2,
bL3) and neutral (bN) terminals.