Using The Standard Input Tray - Xerox Copycentre C20 User Manual

Loading Paper
Using the
Standard Input Tray
2-6 DocuPrint C20/NC20 User Guide
The standard input tray can be used for several different
types of paper. See the Supplies/Options Guide for sizes and
capacity.
To Load the Standard Input Tray
1 Lift the output bin. If a different type of paper is in the
tray, remove it.
2
Squeeze the width guide lever and slide it to the far left
side of the tray.
If loading envelopes, go to Step 6.
3 Slide the length guide out toward you.
4 Flex the sheets back and forth to loosen them, then fan
them. Do not fold or crease the paper. Straighten the
edges on a level surface.