Printing Multiple Jobs
Printing Multiple Jobs
Changing the
Paper Source
2-16
DocuPrint C20/NC20 User Guide
You can use the manual feed slot to print multiple jobs
using sheets of print material or envelopes. To do so, you
must change the Paper Source setting through the Control
Panel. If you know how to use the Control Panel, follow
the procedure below. If you are not familiar with its use,
see Chapter 3: Printing for more information.
1
Make sure the following status message appears on the
display:
Ready
2
Press
or
to enter the menus.
3
Continue to press and release
following on the display:
Ready
Paper Menu
4
Press OK. The following appears on the display:
Paper Menu
Paper Source
until you see the